Fuji Xerox Versant 80 Press User Manual page 812

22 Problem Solving
Error Code
021-508 [Cause]
[Remedy] Check the followings:
021-509 [Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
021-510 [Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
021-511 [Cause]
021-512
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
22
021-513
021-514
021-515 [Cause]
021-516
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
021-517
[Cause]
021-518
[Remedy] Wait for a while, and then execute the operation again. If the error still is not resolved,
021-519
021-520 [Cause]
021-521
[Remedy] Check the followings:
021-522
021-523 [Cause]
[Remedy] Enable the SOAP port, switch off the machine power, make sure that the touch screen is
812
Cause and Remedy
An error occurred while connecting to the EP system via the Internet.
LAN cable connection
DNS server address setting
The default gateway setting
The subnet mask setting
If the error still is not resolved after checking the above settings, there may be a network
failure or the proxy server settings may be changed or failed. Consult your system
administrator.
If the network works normally but the error still is not resolved, contact our Customer
Support Center.
An error occurred while communicating with the EP server.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
An error occurred while connecting to EP system via the Internet.
on the machine power. Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
The machine has already been specified with the EP server.
on the machine power. Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
The settings of the machine on the EP server are incorrect.
on the machine power. Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
An error occurred while the machine is connected to the EP system via the Internet.
contact our Customer Support Center.
An error occurred while connecting to the EP system via the Internet.
The LAN cable connection
The DNS server address setting
The default gateway setting
The subnet mask setting
Check the following for BB-Direct configuration:
EP proxy server setting
If the error still is not resolved after checking the above settings, there may be a network
failure or the DNS server failure. Consult your system administrator.
If the network works normally but the error still is not resolved, contact our Customer
Support Center.
An error occurred while communicating with the EP server.
blank, and then switch on the machine power. If the error still is not resolved, contact
our Customer Support Center.