21 Maintenance
Scale of adjustment
values
Registering an Adjustment Type
The following describes how to register the result of the paper curl adjustment as a custom
adjustment type.
1
Load paper you want to make curl adjustment in a tray.
2
Press the <Log In/Out> button, and enter the System Administration mode.
For how to enter the System Administration mode, refer to "System Settings Procedure" (P.404).
3
Select [Tools] on the Services Home screen.
21
Note
4
Select [System Settings] > [Common Service Settings] > [Maintenance].
5
Select [Adjust Paper Curl].
6
Select a type you want to change the paper
curl adjustment setting, and select [Change
Settings].
7
Select [Name], enter a name for the
adjustment type, and select [Save].
Note
718
Item
Select an adjustment value depending on the degree of curl on the
output paper. Uncheck the [Auto] check box to enable the scale.
To correct upward curl, select a value between [1] and [4] on the
right.
To correct downward curl, select a value between [1] and [4] on the
left.
Select [0] not to apply curl adjustment.
The maximum available adjustment value is [4] for both upward curl
and downward curl. The larger the value, the larger the amount of
adjustment.
• When the Services Home screen is not displayed on the touch screen, press the <Services Home>
button.
• We recommend that you use a name such as
"Uncoated 209 gsm" with which you can
recognize the content.
Description