Fuji Xerox Versant 80 Press User Manual page 857

When the HCF B1-S or the High Capacity Feeder C3-DS is installed
1) Open the front door of the High Capacity Feeder.
2
Open the bottom left door while gripping the
release handle.
3
Remove the jammed paper at the top.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
4
Remove the lower jammed paper if there is.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
5
Close the bottom left door.
Note • A message will be displayed and the machine will not operate if the bottom left door is even slightly
open.
6
When the following option is installed, perform the following.
When the HCF B1 is installed
1) Slowly return the HCF B1 to its original position.
When the HCF B1-S or the High Capacity Feeder C3-DS is installed
1) Close the front door of the High Capacity Feeder.
Paper Jams
22
857