Internet/Intranet Connection Problems - Fuji Xerox Versant 80 Press User Manual

22 Problem Solving

Internet/Intranet Connection Problems

The possible causes and remedies for problems when connecting to the Internet or intranet
are as follows:
When connection to the Internet/Intranet fails
The Authentication feature
used on the remote server is
not supported by the machine.
The remote linkage services
used does not support the
model or accessories of the
machine.
The IP address is incorrect.
The IP gateway address is
incorrect.
The subnet mask is incorrect.
The DNS server address is
incorrect.
22 The DNS server selected
cannot resolve the address.
The address of the address
that does not use a proxy
server is incorrect.
The desired server, or the proxy
server is down.
The network cable is not
connected, or broken.
Cannot communicate because
of overloading of the server
application.
An error occurs that is not
displayed on the control panel.
756
Cause
Only Basic Authentication is supported by the machine. The
machine does not support NTLM/digest.
For security purposes, change to the Authentication feature
using SSL.
Purchase products/models/accessories supported by the remote
linkage services.
Confirm the IP address. If the IP address is incorrect, either set a
static IP address or resolve the IP address using DHCP or AutoIP.
Set the correct IP gateway address when connecting to the
proxy server, or to a Web server via the IP gateway.
Set the correct subnet mask corresponding to your environment.
Confirm the DNS server address.
Select a DNS server that can resolve the address.
When connecting via the proxy server
Set the IP address of a DNS server that can resolve the
address of the proxy server.
When not connecting via the proxy server
Set the IP address of a DNS server that can resolve the
destination address.
Confirm whether only addresses that do not use a proxy server
are set. Even if addresses not through a proxy server are
specified using the FQDN, if a server is directly accessed using its
IP address, the registered server is not excluded. Set the address
not to use a proxy server.
Likewise, even if you directly specify an address that does not
use a proxy server, if a server is accessed with the FQDN, the
registered server is not excluded. Set an IP address with the
FQDN not to use a proxy server.
Confirm whether the desired server or the proxy server is
operating correctly.
Confirm whether the network cable is correctly connected. We
recommend using a spanning-tree configuration, with which
network disconnection rarely occurs.
Wait for a while and try accessing again.
Even though an error occurs during background processing, no
message appears on the control panel. Display the [Job Status]
screen or print the Job History Report to confirm the result.
Remedy