Fuji Xerox Versant 80 Press User Manual page 201

Note
For more information, refer to "[Output Destination/Offset Stacking] screen" (P.201).
Offset Stacking
Displayed when an Offset Catch Tray (optional) is installed.
Select to display the [Offset Stacking] screen.
For more information, refer to "[Offset Stacking] screen" (P.201).
[Output Destination/Offset Stacking] screen
Allows you to select the output destination and offset options.
Offset Stacking
[Offset Stacking] screen will appear.
For more information, refer to "[Offset Stacking] screen" (P.201).
Real Time Sample Job
This option is displayed if you select [Stacker - Stacker Cart] for the output destination, and
you can output samples of specified portions. You can specify up to three portions for each
of the sets you want to confirm during sorting and the pages you want to confirm during
stacking. Samples are output to the output tray at the top of stacker trays.
[Offset Stacking] screen
Allows you to select offset options.
The offset is a function for slightly offsetting and outputting each paper stack to allow you
to distinguish the separations. You can specify by set, job, specified number of pages, or
specified number of copies for a paper stack.
Note
Paper Size and Stapling Position
C3 Finisher (optional)/C3 Finisher with Booklet Maker (optional)
A4 , B5 ,
8 x 10" ,
8.5 x 11", 16K
A4, 8 x 10",
8.5 x 11",
8.5 x 13",
8.5 x 14"
A3, B4,
11 x 17", 8K
• An optional component is required. For more information, contact our Customer Support Center.
• When the offset option is set to [System Default], output is done to the destination set on the
machine. To change the machine setting, refer to "Output Destination" (P.462).
1 Staple
*
1 Top
2 Staples
Right
*
Output Format
2 Top 2 Right
201
4