Fuji Xerox Versant 80 Press User Manual page 966

23 Appendix
Parameter
Folding/180
degree rotation
Emulation target
printer
Pen attributes
23
966
Item No.
168 Specify the Z fold half sheet and whether to rotate landscape documents in
180 degrees.
[0] (Default): None
[1] : Z fold half sheet (Right bind/Top bind)
[2] : Z fold half sheet (Left bind/Bottom bind)
[3] : None (180 degrees rotation)
[4] : Z fold half sheet (Right bind/Top bind, 180 degrees rotation)
[5] : Z fold half sheet (Left bind/Bottom bind, 180 degrees rotation)
169 Select the machine to emulate.
[0] (Default) : HP750
[1] : FX4036
800-815 (Pen Set the width (thickness of the line) of the 16 pens (No. 00 to 15). You can set
width) the width from 0.0 to 25.5 mm in 0.1 mm increments. No. 00 denotes Item
(No. 0-No.15) No. 800.
[0] - [255] (Default: 3) : 0 to 25.5 mm
Note • If the image is reduced by concern with the relationship between
• The width of the line gets thick symmetrically with respect to the center of
• If the width is set to 0.0 mm, nothing is plotted.
850-865 (Line Set the line end shape of the 16 pens (No. 00 to 15). No. 00 denotes Item No.
end shape) 850.
(No. 0-No.15) [0] (Default) : Cut
[1]
[2]
[Cut]
[Round]
[Rectangular]
Value
[Document size] and [Paper size] settings, the pen width is reduced
accordingly to 0.1 mm at the smallest.
the line.
: Round
: Rectangular
: specified coordinate
: specified coordinate
: specified coordinate