Fuji Xerox Versant 80 Press User Manual page 856

22 Problem Solving
5
If the paper is jammed at the handle [2d] or
[2e] , lift up the handle [2d] (1), open the
handle [2e] to the right (2), and remove the
jammed paper (3).
6
If the paper is jammed at the handle [2f] , pull
down the handle [2f] (1), and remove the
jammed paper (2).
7
Return the handles [2b], [2d], [2e] and [2f] to their original position.
8
Insert the transfer module completely (1) and
turn the green handle [2] to the left (2).
22
9
Close the machine front door.
Note
Paper Jams in the Bottom Left Door
1
When the following option is installed, perform the following procedure. If not, proceed to
step 2.
When the HCF B1 is installed
1) Grasp the handle on the top left side of Tray
856
• A message will be displayed and the machine will not operate if the machine front door is even
slightly open.
6 (HCF B1) and pull the tray outwards until
it stops.