Preset Repeat Image (Making Multiple Copies On A Single Sheet) - Fuji Xerox Versant 80 Press User Manual

4 Copy
1
Select any option.
Off
Does not trim the fore edge of booklets.
On
Trims the fore edge of booklets.
Paper Supply
Displays the [Paper Supply] screen. Select the paper tray to be used. Select the tray with
paper loaded in landscape orientation (
Cut to Size
4
Displays the width of the finished booklet after being trimmed by the amount specified in
[Default Trim Margin]. Change the value as necessary.
Note

Preset Repeat Image (Making Multiple Copies on a Single Sheet)

This feature allows you to repeatedly copy one original onto equally divided areas according
to the specified number of copies.
You can select the number of the times the original is copied onto one sheet from [2 Times],
[4 Times], or [8 Times].
2 Times
Note
1
Select [Preset Repeat Image].
196
• You can set [Default Trim Margin] in the System Administration mode. For more information, refer
to "Default Trim Margin" (P.465).
• In rare cases, delivered outputs may contain trim scraps.
4 Times 8 Times
• When you select an option other than [Auto %] in [Reduce/Enlarge], image loss may occur
depending on the image size of the document.
).