Services Controlled By Authentication; Overview; Combination Of Authentication And Account Administration Types - Fuji Xerox Versant 80 Press User Manual

20 Authentication and Accounting Features

Services Controlled by Authentication

This section describes the features that are controlled by the Authentication feature.
The restricted features vary depending on how the machine is used.
For information on the folder and job flow sheet restrictions when the Authentication feature is enabled, refer to
"Authentication for Job Flow Sheets and Folders" (P.647).

Overview

Some restrictions can be set for each user, and other restrictions can be set for the machine
as a whole.
When the authentication feature is used, specified service to be used for each user and the
available number of pages can be restricted.
For information on the restrictions that can be set for each user, refer to "Service Access" (P.537), and for information on the
restrictions that can be set for the machine as a whole, refer to "Service Access" (P.545).
20

Combination of Authentication and Account Administration types

The following shows the services that can be restricted in use and accounted according to
the combination of the authentication and accounting administration types.
For authentication procedure, refer to "Configuration for Authentication" (P.650).
Note
When [Login Type] is [Login to Local Accounts] and [Accounting Type] is [Local
Accounting]
Copy
Print
Scan
O
-
* : For information of available setting for each user, refer to "Service Access" (P.537).
644
Overview......................................................................................................................................................................................... 644
Combination of Authentication and Account Administration types .............................................................................. 644
• To use the combination of user ID authentication and smart card authentication when [Login Type]
is set to [Login to Local Accounts], you need to enable user ID authentication. For the setting
procedure, refer to "Smart Card Link Mode" (P.548).
Restrictions per user
Services
Feature
restrictions
O
O
O
: Available
: Not available
Usage Count
*
Account Limit
*
O
O
O
Per-user
O
O
O