Step 3 Starting The Scan Job - Fuji Xerox Versant 80 Press User Manual

Step 3 Starting the Scan Job

The following describes how to start a scan job.
For information on how to start a scan job on the [Store to WSD] screen, refer to "Store to WSD" (P.282).
Note
1
Press the <Start> button.
Important • If the document has been loaded in the
Note
If you have more documents
If you have more documents to scan, select
[Next Original] on the touch screen while the current document is being scanned. This allows
you to scan the documents as a single set of data.
Up to 999 pages can be stored.
Note
For information on how to set the maximum number of pages stored for a scan document, refer to "Maximum Stored Pages"
(P.503).
2
While documents are being scanned, select
[Next Original].
Note
3
Load the next document.
• WSD stands for Web Services on Devices.
document feeder, do not hold down the
document while it is being conveyed.
• If a problem occurs, an error message
appears on the touch screen. Solve the
problem according to the message.
• You can set the next job during scanning.
• If the number of pages scanned by the machine exceeds the maximum, the machine stops
scanning. Follow the message displayed on the screen, and either abort the operation or save the
already-scanned data as a single set of data.
• When using the document feeder, load the
next document after the machine has
finished scanning the first document.
• When [Next Original] is displayed on the
screen shown on the right and no operation is
performed for a certain period of time, the
machine automatically assumes that there
are no more documents.
• You can change the scan settings of the next document by selecting [Change Settings] that is
displayed after selecting [Next Original].
Scanning Procedure
1 2 3
4 5 6
7 8 9
0 ＃
C
Start
<Start> button
5
221