Fuji Xerox Versant 80 Press User Manual page 719

8
Specify a adjustment value each for [1 Sided -
Face Up], [1 Sided - Face Down], and [2 Sided].
For available option on the setting screen refer to "Paper Curl
Adjustment Types" (P.717).
9
Select [Sample Printout].
10
Select the paper tray you loaded paper, and
then select [Paper Feed Method], [Number of
Sheets], [Front Print Density], and [Back Print
Density].
Note • We recommend that you print about 10
sheets to calculate the average value of the
variations.
11
Press the <Start> button.
The sample print is printed.
12
Select [Confirm].
13
Select [Close].
14
Confirm the sample printout. Correct the curl
adjustment value as required.
Note • For available option on the setting screen,
refer to "Paper Curl Adjustment Types"
(P.717).
15
Select [Sample Printout] again.
16
Select the paper tray you loaded paper, and then set [Paper Feed Method], [Number of
Sheets], [Front Print Density], and [Back Print Density].
17
Press the <Start> button.
The sample printout is printed.
18
Make adjustment again if necessary.
Note • For available option on the setting screen
refer to "Paper Curl Adjustment Types"
(P.717).
19
Select [Save].
20
Select [Close] until the Services Home screen is displayed.
Note • When you configure settings under [System Settings] or [Setup] and then press the <Services Home>
button, the screen directly goes back to the Services Home screen.
Adjust Paper Curl
21
719