Fuji Xerox Versant 80 Press User Manual page 72

2 Product Overview
4
Select [System Settings] > [Common Service
Settings] > [Power Saver Settings].
5
Select [Power Saver Timers], and then select
[Change Settings].
6
2
Using [ ] and [ ], set the time to elapse until
the machine enters the Power Saver mode, in 1
minute increments.
From Last Operation to Low Power Mode
Set the time to elapse from the last operation until the machine enters the Low Power mode.
Note
From Last Operation to Sleep Mode
Set the time to elapse from the last operation until the machine enters the Sleep mode.
Note
7
Select [Save].
8
Select [Close] repeatedly until the [Tools] screen is displayed.
9
Select [Close].
72
• The default value for [From Last Operation to Low Power Mode] is [1] minute. You cannot disable
the Low Power mode.
• The default value for [From Last Operation to Sleep Mode] is [1] minutes. To enable the machine to
enter the Low Power mode before the Sleep mode, you must set a longer period of time for [From
Last Operation to Sleep Mode] than for [From Last Operation to Low Power Mode].