Fuji Xerox Versant 80 Press User Manual page 684

21 Maintenance
Note
4
Align the magenta patch (squares printed at
the top and bottom of the Calibration Chart) of
the printed Calibration Chart against the left
side of the document glass, and load the chart
facing down on the document glass.
Note
5
Place at least five sheets of white paper on the
Calibration Chart to cover the Chart and close
the document cover.
6
Select [Start].
21
The message "Calibration in progress. - Copy Job 2" appears and the machine automatically
calibrates the colors. It takes about 30 seconds to complete calibration.
A screen showing the result appears.
7
Select [Confirm].
8
To continue calibration for other screen types, repeat steps 2 to 7.
9
Select [Close] repeatedly until the Services Home screen is displayed.
Note
10
Copy or print to confirm the image quality.
Note
684
• The message "Outputting the Calibration Chart... - Copy Job 2" appears and the document for
calibration (Calibration Chart) is printed.
• Place the Calibration Chart on the document
glass.
• When you configure settings under [System Settings] or [Setup] and then press the <Services Home>
button, the screen directly goes back to the Services Home screen.
• During auto calibration, the machine cannot receive print jobs.
Magenta