Maintenance - Fuji Xerox Versant 80 Press User Manual

Off
Does not print a report regardless of the data transmission result.
On
Automatically prints a Transmission Report when data is sent successfully and a
Transmission Report - Job Undelivered when data transmission failed.
Print when delivery fails
Prints a Transmission Report - Job Undelivered when the data transmission failed.
2 Sided Report
Select whether to print a report on one side of the paper or both sides when printing a
report/list.
Job Flow Error Report
Select whether or not to automatically print a Job Flow Error Report.

Maintenance

You can initialize or delete data from the hard disk of the machine.
EP Diagnostic Request/Repair Request
When the EP system via the Internet is used, the machine contacts our Customer Support
Center if a check or maintenance is required. Our service representative visits your place as
required.
Note
Check EP Connection
This feature is used to check whether the communications between the machine and our
Customer Support Center function normally when the EP system via the Internet is used.
Note
EP Registration
BB Registration
Select [BB Registration] and then select [Start] to register the machine in EP system.
EPA Server Registration
After the BB registration, [EPA Server Registration] is automatically selected in accordance
with your environment. When this feature is selected, enter the destination server IP of your
EPA server and then select [Start] to register the machine in the EPA server.
Initialize Hard Disk
Initializes the hard disk.
Data deleted by initialization includes supplementary fonts, ESC/P, and HP-GL/2 forms.
Note
• The EP system may not be available in some regions. For more information, contact our Customer
Support Center.
• The EP system may not be available in some regions. For more information, contact our Customer
Support Center.
• The secure print documents and logs are not erased.
Common Service Settings
437
13