Fuji Xerox Versant 80 Press User Manual page 958

23 Appendix
Parameter
Binding
Line termination
Default custom
paper size
Print Quantity
Setup
23
958
Item No.
217 Sets binding when printing 2 sided.
You can select [LEF] or [SEF] for 2 sided printing. Select according to the edge
to be bound. Unifies the leading direction of the image on the front and rear
sides of the paper at the long edge of the paper for LEF and at the short edge
of the paper for SEF.
[0] (Default) : LEF
[1]
218 Sets line termination processing.
[0] (Default) : Off
[1]
[2]
[3]
219 Specifies the default custom paper size.
(Short edge) [2100] (Default short-edge value)
[2970] (Default long-edge value)
220
[0] - [9999]
(Long edge)
221 Sets the method for specifying the number of copies to print.
[0]
[1]
[2] (Default) : Command
Value
: SEF
: Add-LF (Appends an LF to CR)
: Add-CR (Appends a CR to LF and FF)
: CR-XX (Appends a CR to LF and FF, and LF to CR)
: 210.0 mm
: 297.0 mm
: 0 to 999.9 mm
: Protocol
: Panel