Register Paper Feeding Positions
The paper feeding position is adjusted automatically.
You can select the tray and enter the number of sheets for this adjustment. When you select
[Start], the sheets you set feed and the paper feeding position is automatically adjusted.
You can select Tray 1 to 3, 5 (bypass), 6 and 7 (optional).
Note
1
Load the paper in the tray to adjust the paper feeding position.
2
Press <Log In/Out> button.
3
Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
displayed on the screen, and select
[Enter].When a passcode is required, select
[Next] and enter the system administrator's
passcode, and then select [Enter].
Note
4
Select [Tools] on the Services Home screen.
5
Select [System Settings] > [Common Service
Settings] > [Maintenance].
• The paper used for this adjustment is a blank paper and it is not charged.
• The default user ID is "11111".
• The default passcode is "x-admin".
Register Paper Feeding Positions
1
2
3
4
5
6
7
8
9
0
#
<Log In/Out> button
21
723