Fuji Xerox Versant 80 Press User Manual page 317

When stapling/punching holes
The following table shows the stapling/punching positions for scan files. The following uses
the example of [1 Staple] for stapling and [2 Holes] for punching.
For scan files stored in a folder
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
Original
Original
Orientation
Stapling
Position
Punching
Position
setting in [Edge Erase] or in [2 Sided Scanning] on the [Layout Adjustment] screen.
Report
t o r p e R
Report
Report
Report
Report
t o r e p R
Report
Report
Printing Files in a Folder
Report
Report
Report
317
6