Fuji Xerox Versant 80 Press User Manual page 813

Error Code
021-524 [Cause] An error occurred while communicating with the EP server.
021-525
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
021-526
on the machine power. If the same message is displayed again, contact our Customer
021-527 Support Center.
021-528
021-529 [Cause] The machine attempted to upgrade the software of EP system via the Internet, but the
latest software version is already installed.
[Remedy] Contact our Customer Support Center.
021-530 [Cause] An error occurred while connecting to EP system via the Internet.
021-531
[Remedy] Wait for a while, and then execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
021-532
[Cause] The machine attempted to upgrade the software of EP system via the Internet, but the
software upgrade failed.
021-533
021-534
[Remedy] Contact our Customer Support Center.
021-535
021-536
[Cause] The latest software version is not installed.
[Remedy] Reboot the machine and update the software to the latest version. (The machine
automatically reboots again.) Then, execute the operation again.
021-538 [Cause] The software upgrade was canceled since the machine was in use at the reserved time.
[Remedy] Check with your system administrators. If the system administrators have not reserved
the update, contact our Customer Support Center.
021-539 [Cause] The software upgrade was canceled since the machine power was off at the reserved
time.
[Remedy] Check with your system administrators. If the system administrators have not reserved
the update, contact our Customer Support Center.
021-540 [Cause] The SW upgrade was canceled since the machine power was turned off while
downloading the update file.
[Remedy] If necessary, execute the operation again.
021-541 [Cause] The SW upgrade cannot be started since an incorrect setting is done to the machine.
[Remedy] Contact our Customer Support Center.
021-542 [Cause] An error occurred in the machine.
021-543
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
021-545 [Cause] An error occurred while connecting to the EP system via the Internet.
[Remedy] Confirm the contract period of the EP system. When the error is displayed during the
contract period, contact our Customer Support Center.
021-700 [Cause] The USB cable is unplugged or the USB interface may be out of order.
[Remedy] Confirm that the USB cable is connected and switch off the machine power, make sure
that the touch screen is blank, and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
021-701 [Cause] The USB interface error occurred.
[Remedy] Retry after waiting for a while or confirm that the USB cable is connected and switch off
the machine power, make sure that the touch screen is blank, and then switch on the
machine power. If the error still is not resolved, contact our Customer Support Center.
Cause and Remedy
Error Code
22
813