Fuji Xerox Versant 80 Press User Manual page 825

Error Code
027-715 [Cause] The received S/MIME certificate has not been registered on the machine, or has not
been set for use on the machine.
[Remedy] Import the sender's S/MIME certificate to the machine, or change settings to use the S/
MIME certificate on the machine if the S/MIME certificate has already been registered.
027-716 [Cause] The received S/MIME certificate has been discarded because the certificate was
unreliable.
[Remedy] Ask the sender to send the e-mail with a reliable S/MIME certificate attached.
027-717
[Cause] Unable to obtain SMTP server address for e-mail transmissions from the DNS server.
[Remedy] Check whether the DNS server is set correctly.
027-720 [Cause] Unable to find the server of an application interface destination.
[Remedy] Confirm the DNS server address. Or, check whether the computer on which the
application (ApeosWare Flow Service) is installed has been registered on the DNS server.
027-721
[Cause] An application interface destination does not exist.
[Remedy] Check whether the application linked (ApeosWare Flow Service) is operating correctly.
027-722 [Cause] The jobs timed out during connection with an application interface destination.
[Remedy] Try processing the job flow again.
027-723 [Cause] Authentication at the application interface destination (ApeosWare Flow Service)
failed.
[Remedy] Confirm the user name and password that is used when creating a job flow.
027-724 [Cause] An application interface destination (ApeosWare Flow Service) could not be accessed.
[Remedy] Check whether ApeosWare Flow Service is operating correctly. If it is operating correctly,
confirm the log.
027-725
[Cause] A job operation failed using an application interface.
[Remedy] Check whether the application linked (ApeosWare Flow Service) is operating correctly.
If it is operating correctly, confirm the log. If it is not operating, confirm the network
environment.
027-726 [Cause] The status of the application interface destination (ApeosWare Flow Service) is
unknown.
[Remedy] Check whether ApeosWare Flow Service is operating correctly. If it is operating correctly,
confirm the log.
027-727 [Cause] A parameter is illegal during an application interface.
[Remedy] Try processing the job flow again.
027-728 [Cause] The number of files that are to be sent to external services exceeded the maximum
number.
[Remedy] Reduce the number of files, and send them again.
027-730 [Cause] The number of the document pages attached to the SMTP mail exceeds the maximum
number of pages allowed for the Split Send feature.
[Remedy] Increase the number of pages allowed for the Split Send feature, or reduce the number
of the document pages.
027-735 [Cause] The data transfer using SSL is specified, but the SSL setting of the machine is disabled.
[Remedy] Enable the SSL setting, or specify HTTP for the transfer protocol.
Cause and Remedy
Error Code
22
825