Fuji Xerox Versant 80 Press User Manual page 475

IPv4 - IP Address
Enter the IP address using the keyboard displayed or the numeric keypad when selecting
[STATIC] at [IPv4 - IP Address Resolution].
Note • Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
• Specify an IP address using numbers (0 to 9) and periods (.). If you mistyped a character on the
screen, select [Backspace] to delete the character.
IPv4 - Subnet Mask
Enter the subnet mask using the keyboard displayed or the numeric keypad when selecting
[STATIC] at [IPv4 - IP Address Resolution].
Note • Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
• Specify a subnet mask using numbers (0 to 9) and periods (.). If you mistyped a character on the
screen, select [Backspace] to delete the character.
IPv4 - Gateway Address
Enter the gateway address using the keyboard displayed or the numeric keypad when
selecting [STATIC] at [IPv4 - IP Address Resolution].
Note • Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
• Specify a gateway address using numbers (0 to 9) and periods (.). If you mistyped a character on the
screen, select [Backspace] to delete the character.
IPv4 - DNS Server Setup
Set the DNS server.
Get IP Address from DHCP
Set whether or not to automatically obtain the address of the DNS server from the DHCP
server.
Preferred DNS Server IP Address, Alternate DNS Server 1 IP Address, Alternate DNS Server
2 IP Address
When [Get IP Address from DHCP] is set to [Disabled], manually set the DNS server
address.
Specify alternate DNS server addresses for [Alternate DNS Server 1 IP Address] and
[Alternate DNS Server 2 IP Address].
IPv4 - IP Filter
Select whether or not to limit the IPv4 addresses that can access the machine.
Note • [IPv4 - IP Filter] applies to all features using TCP/IP, such as Print, Store to Folder and CentreWare
Internet Service.
• To set the IPv4 IP addresses that the machine accepts connection from, use [IP Filtering] in
CentreWare Internet Services. For more information, refer to the help of CentreWare Internet
Services or refer to "CentreWare Internet Services Settings" (P.555).
• When [IP Filtering] is enabled, make sure to switch the FTP transfer mode to [Active Mode] to
transfer the scanned image from the machine via FTP. You can switch the FTP transfer mode from
CentreWare Internet Services.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
connect to the Internet. The communication fee shall be borne by you.
IPv6 Address Manual Configuration
Allows you to select whether or not to configure the IPv6-address settings manually.
Manually Configured IPv6 Address
This setting is configurable when [IPv6 Address Manual Configuration] is set to [Enable].
Specify an IPv6 address.
Connectivity & Network Setup
475
13