Fuji Xerox Versant 80 Press User Manual page 100

3 Paper and Other Media
Loadable Quantity
The following describes the quantity that can be loaded in each paper tray.
Tray 1, 2, 3
Tray 5 (Bypass)
Tray 6
HCF B1
HCF B1-S
High Capacity Feeder C3-DS (upper
tray)
Tray 7
3
High Capacity Feeder C3-DS (lower tray)
Tray T1
Inserter
*1 : When using FX J Paper
*2 : When using FX P Paper
Paper Feed Method
Automatic duplex print
The following describes the paper type and basis weight that can be used with automatic
duplex print.
Uncoated
Recycled
Coated
Postcard
Cast Coated
Mat Coated
Embossed
Note
100
• When loading postcards in the HCF B1-S (optional) or the High Capacity Feeder C3-DS (optional),
the Post Card Kit is required.
• When you specify postcard for the Paper Type of a paper tray, specify postcard for the Paper Size as
well.
If you specify another paper size, the job will be canceled.
Paper Tray
Paper Type
52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
64 - 79, 80 - 90, 91 - 105
52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
106 - 135, 136 - 157, 158 - 176, 177 - 220
52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
106 - 135, 136 - 157, 158 - 176, 177 - 220
• The paper size that can be used with automatic duplex print is 98.0 to 330.2 mm in width and 148.0
to 488.0 mm in total length.
• The paper length of 146.0 to 147.9 mm is also supported, but the image quality and paper feed
performance are not guaranteed.
Loadable Quantity
570 sheets (per tray)
250 sheets
2,100 sheets (per tray)
2,100 sheets
*2
200 sheets
Basis Weight Selection Group (Unit: gsm)
*1
*1
*1
*1