Fuji Xerox Versant 80 Press User Manual page 846

22 Problem Solving
Error Code
116-780 [Cause]
[Remedy] Check the attached document.
116-790 [Cause]
[Remedy] Check whether the staple position has been correctly specified, and try printing again.
117-310 [Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
Note
117-311 [Cause]
[Remedy] Contact our Customer Support Center.
117-312
[Cause]
117-319
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
117-320
117-321
117-322
117-323
117-324
117-326
117-327
117-329
22
117-330
117-331
117-332
117-333
117-345 [Cause]
[Remedy] Disconnect the related device from the machine, and then restart the machine. Select
117-347 [Cause]
[Remedy] Contact our Customer Support Center.
117-348 [Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
118-310 [Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
118-311 [Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
846
Cause and Remedy
There is a problem with the document attached to the received e-mail.
No set of the document is stapled.
An error occurred while scanning a document via WSD.
on the machine power. Execute the same operation again.
• WSD stands for Web Services on Devices.
The data security feature has a problem.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
An error occurred between the machine and the related device.
an option other than [Login to Remote Accounts] under [Tools] > [Authentication/
Security Settings] > [Authentication] > [Login Type].
The life of the component which cannot be replaced is expired. The machine itself needs
to be replaced.
The unformatted SD card used in the other machine is installed.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
An error occurred during software processing.
on the machine power. If the same message is displayed again, contact our Customer
Support Center.