Fuji Xerox Versant 80 Press User Manual page 772

22 Problem Solving
Error Code
016-519 [Cause]
[Remedy] Have your system administrator change the maximum limit of printable pages.
016-520
[Cause]
[Remedy] Execute the operation again. Also change the output file format and color mode.
016-521 [Cause]
[Remedy] Switch off the machine power and connect the IC Card Reader, and then switch on the
016-522 [Cause]
[Remedy] The LDAP server is requesting an SSL client certificate. Set an SSL client certificate on
016-523 [Cause]
[Remedy] The machine cannot trust the SSL certificate of the LDAP server. Register the root
016-524
[Cause]
22
[Remedy] Change the SSL certificate of the LDAP server to a valid one. You can clear this error by
016-525 [Cause]
[Remedy] Change the SSL certificate of the LDAP server to a valid one. You can clear this error by
016-526
[Cause]
[Remedy] Set the same LDAP server address to the machine and to the SSL certificate of the LDAP
016-527 [Cause]
[Remedy] An error occurred in the software. Contact our Customer Support Center.
016-528
[Cause]
[Remedy] Log in to the machine with the smart card, and then execute the operation again.
016-529 [Cause]
[Remedy] Confirm the network connection. Check whether the Remote Download server is
772
Cause and Remedy
The number of pages reached the maximum number of pages specified, and the print
job is terminated.
An error occurred in the high compression hardware.
If the problem is not resolved, switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. And then perform the above
operation again.
If the error still is not resolved, contact our Customer Support Center.
The IC Card Reader (sold separately) is disconnected from the machine while scanning
the data with a digital signature.
machine power.
LDAP server SSL authentication error. Unable to acquire an SSL client certificate.
the machine.
LDAP server SSL authentication error. The server certificate data is incorrect.
certificate for the LDAP server's SSL certificate to the machine.
LDAP server SSL authentication error. The server certificate will expire soon.
selecting [Disabled] for [LDAP - SSL/TLS Communication] under [SSL/TLS Settings] on
the machine; however, note that selecting this option does not ensure the validity of the
LDAP server.
LDAP server SSL authentication error. The server certificate has expired.
selecting [Disabled] for [LDAP - SSL/TLS Communication] under [SSL/TLS Settings] on
the machine; however, note that selecting this option does not ensure the validity of the
LDAP server.
LDAP server SSL authentication error. The server name does not match the certificate.
server. You can clear this error by selecting [Disabled] for [LDAP - SSL/TLS
Communication] under [SSL/TLS Settings] on the machine; however, note that selecting
this option does not ensure the validity of the LDAP server.
LDAP server SSL authentication error. This is an SSL authentication internal error.
You are logged out of the smart card authentication mode while scanning the data with
a digital signature.
An error occurred when connecting to the Remote Download server. There was no
response from the server within the specified time (45 seconds).
correctly set on the network.