Fuji Xerox Versant 80 Press User Manual page 82

2 Product Overview
If you select [(Not Assigned)], the position of the selected button becomes blank.
You cannot assign [Setup] to [(Not Assigned)]. If you do not want to display the [Setup]
button, select the [Show this in Admin mode] check box.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
2
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note
3
Select [Tools] on the Services Home screen.
Note
4
Select [System Settings] > [Common Service
Settings] > [Screen/Button Settings].
5
Select [Services Home - Additional Features],
and then select [Change Settings].
Note
82
• The default user ID is "11111".
• The default passcode is "x-admin".
• When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
• Select [ ] to display the previous screen or
[ ] to display the next screen.
1 2 3
4 5 6
7 8 9
0 ＃
<Log In/Out> button