Improving The Paper Feeding Performance - Fuji Xerox Versant 80 Press User Manual

3 Paper and Other Media

Improving the Paper Feeding Performance

The paper feeding performance can be improved when the HCF B1-S (Tray 6) or the High
Capacity Feeder C3-DS (Trays 6 and 7) is used.
If images are skewed even when paper is loaded correctly, use the following procedure so
that the paper might be fed more accurately.
The following describes how to improve the paper feeding performance in Tray 6 of the High
Capacity Feeder C3-DS as an example.
The procedure is the same as for the HCF B1-S (Tray 6) and the High Capacity Feeder C3-DS
(Tray 7).
Important • If any of the following types of paper is loaded in the tray, performing the procedure in this section
1
3
Pull out the tray towards you until it stops.
When pulling out the paper tray, do it
slowly. If pulled out with too much
force, the tray can hit and injure your
knees.
Important • While the machine is processing a job, do not
2
Slide the switch on top of the long-side paper
guide to the right until it stops.
Note
3
If the paper feeding performance is not
improved after step 2, slide the switch on the
right front side towards the back of the
machine until it stops.
Important • To return the switch to its original position,
4
Push the tray in gently until it stops.
122
may cause the paper to be fed improperly, resulting in paper jams
Uncoated (221 - 350 gsm)
Tab Stock (221 - 350 gsm)
Punched (221 - 350 gsm)
CAUTION
pull out the tray that the job uses.
• To return the switch to its original position,
slide it to the left until it stops.
slide it towards you until it stops.
Uncoated Reload (221 - 350 gsm)
Adhesive
Postcard (257 - 350 gsm)