Fuji Xerox Versant 80 Press User Manual page 924

23 Appendix
Stacker
Capacity
Note
When using
FX P Paper.
Staple
23
Punch
Booklet
Finishing
924
Output Tray
Finisher Tray
(with no staple)
Finisher Tray
(with staple)
Booklet Tray
Capacity
Paper Size
Position
Number of Holes
Paper Size
Paper Weight
Capacity
Paper Size
500 sheets
A4 : 2,000 sheets
B4 or larger: 1,500 sheets
*
Mix stack: 350 sheets
*
Important • When larger size papers are loaded on smaller
size papers.
A4 : 200 sets or 2,000 sheets
B4 or larger: 100 sets or 1,500 sheets
20 sets
Important • In case of center binding, 15 sheets/set
• For 16 sheets/set, up to 15 sets.
• Some papers may not be placed into tray
depending on the Paper Weight.
100 sheets
Important • When using FX P Paper
• 65 sheets when using paper larger than A4 / 8.5 ×
11".
• Staples may be bent depending on the
deployment conditions such as Paper Weight.
Standard Size:
Maximum: A3, 11 × 17"
Minimum: B5
<1 place>
Front: Angled stapling
Center: Parallel stapling
Rear : Parallel stapling
Angled stapling (A3 and A4
<2 places>
Parallel stapling
<4 places>
Parallel stapling
2 or 4,
3 (optional)
Maximum: A3, 11 × 17"
Minimum: B5 (2 holes), A4 , 8.5 x 11"
52 - 220 gsm
Center binding: 20 sheets
Center folding: 5 sheets
Note • When a cover is attached, the maximum number
of sheets decreases depending on the paper
weight.
• Our customer engineers can change maximum
number of sheets for center-binding (up to 25
sheets).
Standard size: Maximum: A3, 11 x 17"
Minimum: A4, 8.5 x 11"
Non-standard size: Maximum: 330 x 457 mm
Minimum: 210 x 279 mm
only)
(4 holes)