Fuji Xerox Versant 80 Press User Manual page 800

22 Problem Solving
Error Code
018-751 [Cause]
[Remedy] The service has a problem. Retry after waiting for a while. If the error still is not resolved,
018-752 [Cause]
[Remedy] The LDAP server has a service problem. Retry after waiting for a while. If the error still is
018-753 [Cause]
[Remedy] The LDAP server has a service problem. Retry after waiting for a while. If the error still is
018-754
[Cause]
[Remedy] The LDAP server has a service problem. Have your network administrator confirm the
018-755 [Cause]
[Remedy] Confirm the file Sharing service (communicating via port 139 (TCP), and port 445 (TCP))
22
018-756 [Cause]
[Remedy] When the transferring destination server belongs to the ActiveDirectory domain, check
018-757 [Cause]
[Remedy] Take one of the following measures.
018-758 [Cause]
[Remedy] Take one of the following measures.
800
Cause and Remedy
An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "51" (busy) for Address Book query.
consult your network administrator.
An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "52" (unavailable) for Address Book query.
not resolved, consult your network administrator.
An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "53" (unwilling to perform) for Address
Book query.
not resolved, consult your network administrator.
An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "54" (loop detected) for Address Book
query.
operational status of the service on the LDAP server.
The SMB server specified as the destination does not respond to the machine while
transferring data using SMB of the Scan to PC service.
is authorized for the transferring destination server, router between the machine and
server, and virus security software or firewall software on the forwarding destination
server.
A response from the server are not received within the specified time while transferring
data using SMB of the Scan to PC service.
whether the communication between the destination server and domain controller is
delayed or not by accessing the destination server from the PC client. If it takes time,
consult your System Administrator.
Failed to name resolution of the SMB server specified as destination to transfer data
using SMB of the Scan to PC service.
Confirm the DNS server address is correctly set.
If the connection with the DNS server is appropriate, confirm the transferring
destination server name is registered to the DNS server.
The save location or file name of a scanned image has a problem while transferring
data using SMB of the Scan to PC service. Probable cause is that the specified save
location does not exist on the server.
Check whether the save location is correct.
Check whether the specified folder name can be used in the SMB server.