Fuji Xerox Versant 80 Press User Manual page 769

Error Code
016-360 [Cause] An error occurred.
016-362
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
016-363
on the machine power. If the same message is displayed again, contact our Customer
016-364 Support Center.
016-365
016-366
016-367
016-368
016-369
016-370
016-371
016-372
016-373
016-374
016-375
016-376
016-377
016-378
016-379
016-380
016-381
016-382
016-400 [Cause] The user name or password for 802.1x authentication does not match in the setting of
Ethernet1.
[Remedy] Confirm and correctly enter the user name or password in the setting of Ethernet1. If
the error still is not resolved, check whether the network environment is set correctly.
016-401 [Cause] The 802.1x authentication method cannot be processed in the setting of Ethernet1.
[Remedy] Set the authentication method of the machine to the same method as set for the
authentication server in the setting of Ethernet1.
016-402
[Cause] The authentication connection of Ethernet1 timed out.
[Remedy] Confirm the network connection of Ethernet1 and switch setting of the authentication
device physically connected to the machine via a network, and check whether it is
connected to the machine correctly.
016-403 [Cause] The root certificate of Ethernet1 did not match.
016-404
[Remedy] Confirm the authentication server and store the root certificate of the server certificate
of the authentication server into the machine.
If you cannot acquire the root certificate of the server certificate, set [Server Certificate
Verification] of [IEEE 802.1X Settings] for Ethernet1 to [Disabled] on the touch screen.
016-405 [Cause] An error occurred in the certificate stored in the machine.
[Remedy] Initialize the certificate.
For more information on initializing certificates, refer to "Delete All Certificates/Initialize Settings" (P.440).
016-406 [Cause] An error occurred in the SSL client certificate.
[Remedy] Take one of the following measures:
1) Store an SSL client certificate in the machine to set the SSL client certificate.
2) If an SSL client certificate cannot be set on the machine, select an option other than
Cause and Remedy
[EAP-TLS] in [Authentication Method].
Error Code
22
769