Fuji Xerox Versant 80 Press User Manual page 672

21 Maintenance
9
Slightly push the booklet staple cartridge
upward, and make sure that it clicks into place.
Note
10
Return the booklet unit to its original position.
11
Close the finisher front door.
Note
21
When the Finisher D4 with Booklet is installed
1
Make sure that the machine has stopped, and
open the finisher right door.
2
While pushing the handle [R2 R3] to the right
(1), pull the unit out of the machine (2).
3
With holding the tabs on the right and left side
of the cartridge from the side, lift the cartridge
slightly out of the unit. Then, unlock the
cartridge.
672
• Return the booklet staple cartridge until ( )
of the booklet staple cartridge is fitted in ( )
of the booklet unit.
• If the front door is not closed completely, a message appears and the machine will remain paused.
Handle [R2 R3]