Fuji Xerox Versant 80 Press User Manual page 819

Error Code
026-739 [Cause] When authentication succeeds, due to that there are pending scan job, either of these
jobs is canceled.
[Remedy] No measure is required.
027-442
[Cause] The IP address of IPv6 on the Ethernet2 already network exists.
[Remedy] Change the [Auto Stateless Address 1] for IPv6 on the machine, or the IP address of
IPv6 on the network device, to remove the duplication of addresses.
027-443 [Cause] The IP address of IPv6 on the Ethernet2 already exists.
[Remedy] Change the [Auto Stateless Address 2] for IPv6 on the machine, or the IP address of
IPv6 on the network device, to remove the duplication of addresses.
027-444 [Cause] The IP address of IPv6 on the Ethernet2 already exists.
[Remedy] Change the [Auto Stateless Address 3] for IPv6 on the machine, or the IP address of
IPv6 on the network device, to remove the duplication of addresses.
027-445
[Cause] IP address for IPv6 set manually is incorrect.
[Remedy] Set the IP address correctly.
027-446 [Cause] The IP address of IPv6 set manually already exists.
[Remedy] Change the [Manually Configured IPv6 Address] on the machine, or the IP address of
IPv6 on the network device, to remove the duplication of addresses.
027-447
[Cause] The IP address of IPv6 on the Ethernet2 network already exists.
[Remedy] Change the [Link-local Address] for IPv6 on the machine, or the IP address of IPv6 on
the network device, to remove the duplication of addresses.
027-452 [Cause] IP address of IPv4 already exists.
[Remedy] Change the IP address of IPv4 set on the machine or the IP address of IPv4 on the
network device.
027-500 [Cause] Unable to connect to the SMTP server.
[Remedy] Specify the SMTP server name correctly or specify the server by using its IP address.
027-501 [Cause] A POP server error occurred.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
027-502 [Cause] Failed to log into the POP3 server when using the POP3 protocol.
[Remedy] Confirm whether the user name and password used in the POP3 server are correct on
CentreWare Internet Services.
027-503
[Cause] A POP server error occurred.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
027-504
[Cause] An SMTP server error occurred.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
027-513 [Cause] The machine failed to transfer data using SMB of the Scan to PC service because access
to the SMB server was not permitted.
[Remedy] Consult your system administrator for settings.
Cause and Remedy
Error Code
22
819