Switching The Power Off - Fuji Xerox Versant 80 Press User Manual

1
Press the power switch to switch the power on.
Note

Switching the Power Off

Note
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
1
Before switching the power off, make sure that the machine has completed all copy or print
jobs. Then, make sure that the <Data> indicator is not blinking.
Important • Do not switch the power off in the following situations. If the power is switched off, the processing
2
Press the power switch.
Important • Power off processing is performed internally on the machine for a while after the power is switched
• The "Please wait..." message indicates that
the machine is warming up. The machine is
not available during warming up.
• If the machine is not powered on, check the
following:
- The power cord is plugged in.
- The main power is switched on.
- The <TEST> button is in the depressed
position.
- The ground fault interrupter is ON (upper
position).
• You can switch the power off using CentreWare Internet Services. For more information, refer to the
help of the CentreWare Internet Services.
connect to the Internet. The communication fee shall be borne by you.
data may be erased.
- While data is being received
- While a job is being printed
- While a job is being copied
- While a job is being scanned
- While data is being imported from a computer
• When switching the power off, wait 5 seconds after outputs have been delivered.
off. Therefore, do not switch the main power off immediately after switching the power off.
• When you switch the power off, the <Power Saver> button on the control panel may continue
blinking even after the touch screen goes dark. It means the cooling process is in progress. The
process takes up to about 30 to 60 minutes depending on the internal temperature of the machine.
Do not switch the main power off until the light of the <Power Saver> button goes off.
Ground fault interrupter
<TEST> button
Power Source
2
65