Folding (Outputting Bi-Folded/Tri-Folded Paper) - Fuji Xerox Versant 80 Press User Manual

4 Copy
1
Select [Face Up/Down Output].
2
Select any option.
Note
Auto
Automatically determines whether copies are output facing up or down.
Face Up
Copies are output facing up and delivered from the last page.
Face Down
Copies are output facing down and delivered from the last page.
4
Face Up (Reverse Order)
Copies are output facing up and delivered from the first page.
Note

Folding (Outputting Bi-Folded/Tri-Folded Paper)

This feature allows you to fold copies in half or in three.
When the C3 Finisher with Booklet Maker (optional) or the Booklet Finisher D4 (optional) is
installed, [Single Fold] is available.
When the D4/D5 Folder Unit (optional) is installed, [Z Fold] and [C Fold] are also available.
Note
1
Select [Folding].
2
Select any option.
Off
Does not fold copies.
194
• To display [Face Up (Reverse Order)] on the [Face Up/Down Output] screen, a prior setting is
required in the System Administration mode.
• To display [Face Up (Reverse Order)] on the [Face Up/Down Output] screen, a prior setting is
required in the System Administration mode.
• The supported paper orientation is only
• [Z Fold] and [C Fold] can only be applied to A4 and 8.5 x 11" paper.
• An optional component is required for this feature. For more information, contact our Customer
Support Center.
• When the C3 Finisher is installed, making the fold assisting crease on a paper is available. For more
information, refer to "Fold Assisting Crease" (P.439).
. Select the tray whose orientation is set to .