Fuji Xerox Versant 80 Press User Manual page 78

2 Product Overview
4
Select [System Settings] > [Common Service
Settings] > [Screen/Button Settings].
5
Select [Screen After Auto Clear], and then
select [Change Settings].
2
6
Select [Last Selection Screen] or [Services
Home].
7
Select [Save].
Assigning Services to the Custom Buttons
You can assign services to the custom buttons on the control panel: Custom 1 to Custom 3.
By assigning frequently-used services to the custom buttons, you can switch to the services
without returning to the Services Home screen.
Note
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note
78
• By default, "Copy" is assigned to <Custom Button 1> and "Review" is assigned to <Custom Button 3>.
No service is assigned to <Custom Button 2>.
• The default user ID is "11111".
• The default passcode is "x-admin".
1 2 3
4 5 6
7 8 9
0 ＃
<Log In/Out> button