Switching The Main Power Off - Fuji Xerox Versant 80 Press User Manual

2 Product Overview
Note

Switching the Main Power Off

Important • Do not switch the main power off while the touch screen displays a screen or the <Power Saver>
1
Make sure that the power is switched off.
2
Make sure that the touch screen is blank and the <Power Saver> button does not light up.
2
3
Open the machine front door.
4
Press the main power switch to the [
position to switch the main power off.
The <Main Power> indicator goes out on the
control panel.
5
Close the machine front door.
66
• When powering the machine on after it has been switched off, wait 10 seconds after the touch
screen has gone dark.
button blinks. Switching off the main power may damage the hard disk and the memory or cause a
machine malfunction.
• When you switch the power off, the <Power Saver> button on the control panel may continue
blinking even after the touch screen goes dark. It means the cooling process is in progress. The
process takes up to about 30 to 60 minutes depending on the internal temperature of the machine.
Do not switch the main power off until the light of the <Power Saver> button goes off.
• Switch the main power off first when unplugging the power cord. Unplugging the power cord with
the main power on may damage the hard disk and the memory or cause a machine malfunction.
]