Timing Chain Cover Components - Suzuki Swift Sport 2004 Service & Repair Manual

15) Install A/C compressor to its bracket (if equipped)
referring to "Compressor Assembly Removal and
Installation in Section 7B" or "Compressor Assembly
Removal and Installation in Section 7B".
16) Adjust A/C compressor belt tension (if equipped)
referring to "Compressor Drive Belt Inspection and
Adjustment in Section 7B" or "Compressor Drive Belt
Inspection and Adjustment in Section 7B".
17) Check to ensure that all removed parts are back in
place.
Reinstall any necessary parts which have not been
reinstalled.
18) Refill cooling system with coolant referring to
"Cooling System Flush and Refill in Section 1F".

Timing Chain Cover Components

1. Crankshaft pulley bolt
2. Crankshaft pulley
3. Oil seal
: Apply engine oil to oil seal lip.
4. Timing chain cover
: Apply sealant 99000-31140 to the mating surface of cylinder and cylinder head.
: Apply sealant 99000-31260 to the mating surface of timing chain cover referring to the
figure of Step 4) of "Installation" under "Timing Chain Cover Removal and Installation".
5. Pin
6. Cap bolt
7. Timing chain cover mounting bolts
8. Timing chain cover mounting nut
9. Oil gallery pipe No.1
19) Refill engine with engine oil referring to "Engine Oil
and Filter Change in Section 0B".
20) Refill transaxle with transaxle oil referring to"Manual
Transaxle Oil Change in Section 5B" or "A/T Fluid
Change in Section 5A".
21) Install battery and tray.
22) Connect positive and negative cable at battery.
23) Install engine hood and connect windshield washer
hose.
24) Verify that there is no fuel leakage, coolant leakage,
oil leakage and exhaust gas leakage at each
connection.
Engine Mechanical: 1D-20
S7RS0B1406012
I6RS0C140015-02
13. Oil gallery pipe No.2 bolt
14. Oil gallery pipe No.3
15. Oil gallery pipe No.3 bolt
16. O-ring
: Apply engine oil.
17. Oil control valve
18. Oil control valve mounting nut
19. Cap
: 11 N⋅m (1.1 kgf-m, 8.0 lb-ft)
: 25 N⋅m (2.5 kgf-m, 18.0 lb-ft)