5A-130 Automatic Transmission/Transaxle:
4) Remove forward clutch balancer (1).
5) Remove forward clutch return spring subassembly
(1).
2. Intermediate shaft subassembly
6) Install intermediate shaft subassembly (1) to
transaxle rear cover (2). Apply compressed air (400
– 800 kPa, 4 – 8 kg/cm
of transaxle rear cover to remove forward clutch
piston (4).
I2RH0B510180-01
I2RH0B510181-01
2
, 57 – 113 psi) to oil hole (3)
I2RH0B510182-01
7) Apply compressed air (400 – 800 kPa, 4 – 8 kg/cm
57 – 113 psi) to oil hole (1) of transaxle rear cover to
remove forward clutch drum (2).
8) Remove forward clutch piston O-ring (1) from
intermediate shaft subassembly (2).
9) Remove forward clutch drum O-ring (1) from forward
clutch drum (2).
10) Remove intermediate shaft seal ring (1) from
intermediate shaft subassembly (2).
2
,
I2RH0B510183-01
I2RH0B510184-01
I2RH0B510185-01
I2RH0B510186-01