Repair Instructions; Starting Motor Dismounting And Remounting - Suzuki Swift Sport 2004 Service & Repair Manual

Starting Motor Dismounting and Remounting

Dismounting
1) Disconnect negative (–) battery lead at battery.
2) Disconnect magnetic switch lead wire (1) and battery cable (2) from starting motor terminals.
3) Detach shift & select control cable bracket from transaxle. (M/T model only)
4) Remove starting motor mount bolt (3) and nut (4).
5) Remove starting motor (5).
Remounting
Reverse the dismounting procedure noting the following.
• Tighten battery cable nut (6) to specified torque.
Tightening torque
Starting motor battery cable nut (a): 9.8 N·m (0.98 kgf-m, 7.0 lb-ft)

Repair Instructions

: 9.8 N⋅m (0.98 kgf-m, 7.0 lb-ft)
Starting System: 1I-4
S7RS0B1906001
I4RS0A190002-01