A/T Relay Inspection; Differential Side Oil Seal Replacement - Suzuki Swift Sport 2004 Service & Repair Manual

Installation
Reverse removal procedure noting the following.
• Connect TCM connectors securely.
• If the vehicle is equipped with air bag system, be sure
to enable air bag system after TCM is back in place.
Refer to "Enabling Air Bag System in Section 8B".

A/T Relay Inspection

1) Disconnect negative cable at battery.
2) Remove A/T relay (2) from fuse and relay box (1).
3) Check that there is no continuity between terminal
"C" and "D".
If continuity is indicated, replace A/T relay.
4) Connect battery positive (+) terminal to terminal "A"
of A/T relay and battery negative (–) terminal to
terminal "B" of A/T relay.
Check continuity between terminal "C" and "D" of A/T
relay.
If continuity does not indicated, replace A/T relay.
1
"A"
"B"
"D"
S7RS0B5106027
2
"C"
I6RS0C510012-01
Automatic Transmission/Transaxle:

Differential Side Oil Seal Replacement

1) Lift up vehicle and drain automatic transaxle fluid.
2) Remove drive shaft joints from differential gear of
transaxle. Refer to "Front Drive Shaft Assembly
Removal and Installation in Section 3A" for
procedure to disconnect drive shaft joints.
For differential side oil seal removal, it is not
necessary to remove drive shafts from steering
knuckle.
3) Remove differential side oil seal (1) by using
screwdriver or the like.
5A-103
S7RS0B5106028
I2RH0B510067-01