1D-18 Engine Mechanical: For M16A Engine with VVT
Timing Chain Cover Components
1. Crankshaft pulley bolt
2. Crankshaft pulley
3. Oil seal
: Apply engine oil to oil seal lip.
4. Timing chain cover
: Apply sealant 99000-31140 to the mating surface
of cylinder and cylinder head.
: Apply sealant 99000-31260 to the mating surface
of timing chain cover referring to the figure of Step 4)
of "Installation" under "Timing Chain Cover Removal
and Installation: For M16A Engine with VVT".
5. Pin
6. Oil control valve mounting nut
7. Timing chain cover mounting bolts
8. Timing chain cover mounting nut
9. Oil gallery pipe No.1
10. Copper washer
11. Oil gallery pipe No.1 bolt
12. Oil gallery pipe No.2
13. Oil gallery pipe No.2 bolt
14. Oil gallery pipe No.3
15. Oil gallery pipe No.3 bolt
16. O-ring
: Apply engine oil.
S6JB0A1416011
I5JB0A141020-02
17. Oil control valve
: 11 N⋅m (1.1 kgf-m, 8.0 lb-ft)
: 25 N⋅m (2.5 kgf-m, 18.0 lb-ft)
: 30 N⋅m (3.0 kgf-m, 22.0 lb-ft)
: 150 N⋅m (15.0 kgf-m, 108.5 lb-ft)
: Do not reuse.