Suzuki Swift Sport 2004 Service & Repair Manual page 25

Standard Tightening Torque
Each fastener should be tightened to the torque specified in each section. If no description or specification is provided,
refer to the following tightening torque chart for the applicable torque for each fastener. When a fastener of greater
strength than the original one is used, however, use the torque specified for the original fastener.
NOTE
• For the flanged bolt, flanged nut and self-lock nut of 4T and 7T strength, add 10% to the tightening
torque given in the following chart.
• The following chart is applicable only where the fastened parts are made of steel light alloy.
Tightening torque chart
Strength
A equivalent of 4T strength fastener
A equivalent of 6.8 strength fastener
without flange
A equivalent of 6.8 strength fastener
with flange
*: Self-lock nut (6 strength)
A equivalent of 7T strength fastener
A equivalent of 8.8 strength bolt (8
strength nut) without flange
A equivalent of 8.8 strength bolt (8
strength nut) with flange
*:Self-lock nut
Unit
4
N⋅m 1.5
kgf-m 0.15
lb-ft 1.0
I2RH01010012-01
N⋅m 2.4
kgf-m 0.24
lb-ft 2.0
I2RH01010013-01
N⋅m 2.4
kgf-m 0.24
lb-ft 2.0
I2RH01010014-01
N⋅m 2.3
kgf-m 0.23
lb-ft 2.0
I2RH01010015-01
N⋅m 3.1
kgf-m 0.31
lb-ft 2.5
I2RH01010016-01
N⋅m 3.2
kgf-m 0.32
lb-ft 2.5
I2RH01010017-01
Thread diameter (Nominal diameter) (mm)
5 6 8 10
3.0 5.5 13 29
0.30 0.55 1.3 2.9
2.5 4.0 9.5 21.0
4.7 8.4 20 42
0.47 0.84 2.0 4.2
3.5 6.0 14.5 30.5
4.9 8.8 21 44
0.49 0.88 2.1 4.4
3.5 6.5 15.5 32.0
4.5 10 23 50
0.45 1.0 2.3 5.0
3.5 7.5 17.0 36.5
6.3 11 27 56
0.63 1.1 2.7 5.6
4.5 8.0 19.5 40.5
6.5 12 29 59
0.65 1.2 2.9 5.9
5.0 9.0 21.0 43.0
General Information:
12 14 16
45 65 105 160
4.5 6.5 10.5 16
32.5 47.0 76.0 116.0
80 125 193 280
8.0 12.5 19.3 28
58.0 90.5 139.5 202.5
84 133 203 298
8.4 13.3 20.3 29.8
61.0 96.5 147.0 215.5
85 135 210 240
8.5 13.5 21
61.5 98.0 152.0 174.0
105 168 258 373
10.5 16.8 25.8 37.3
76.0 121.5 187.0 270.0
113 175 270 395
11.3 17.5 27 39.5
82.0 126.5 195.5 286.0
0A-4
18
24