Suzuki Swift Sport 2004 Service & Repair Manual page 832

5B-18 Manual Transmission/Transaxle:
18) Remove differential bearing shim.
19) Remove differential side bearing outer race from left
case (1) using special tools.
Special tool
(A): 09924–74510
(B): 09926–27610
20) Remove differential gear assembly (1) from right
case (2).
Reassembly
1) Install differential assembly (1) into right case (2).
2) Join input shaft assembly (5), countershaft assembly
(4), low speed gear shift shaft (2) and high speed
gear shift shaft (3) assemblies all together, then
install them into right case (1).
!
Take care not to damage oil seal lip by input
shaft, or oil leakage may take place.
(A)
NOTE
• Input shaft right bearing on shaft can be
(B)
installed into right case tapping shaft with
plastic hammer.
• Check to make sure that countershaft is
engaged with final gear while installing.
1
I4RS0A520035-01
3) Install 5th & reverse gear shift shaft (1) with 5th &
reverse gear shift guide shaft (2) into right case (5).
Reverse gear shift arm (4) has to be joined with
reverse gear shift lever (3) at the same time.
I6RS0C520006-02
I6RS0C520006-02
CAUTION
I2RH01520080-01
I2RH01520081-01