Timing Chain And Chain Tensioner Inspection - Suzuki Swift Sport 2004 Service & Repair Manual

1D-27 Engine Mechanical:
8) Screw in plunger (1) by turning body (2) in arrow
direction and install a retainer (3) (wire) to hold
plunger in place.
9) Install timing chain tensioner adjuster assembly (1)
with a retainer (2).
Tighten adjuster bolts to specified torque and then
remove a retainer from chain tensioner adjuster
assembly.
Tightening torque
Timing chain tensioner adjuster bolt (a): 11 N·m
(1.1 kgf-m, 8.0 lb-ft)
10) Apply engine oil to timing chain, and then turn
crankshaft clockwise by 2 revolutions and check that
match marks (1) are at the following specific
positions.
• Intake and exhaust camshaft timing sprockets
makes (1) are in match with notches (2) on
cylinder head.
• Crankshaft sprocket key (3) is in match with notch
of cylinder block (4).
• Crankshaft sprocket key (3) is on upside of
crankshaft as shown in figure.
I2RH0B140065-01
11) Install timing chain cover referring to "Timing Chain
Cover Removal and Installation".

Timing Chain and Chain Tensioner Inspection

Timing Chain No.1 Guide
Check shoe (1) for wear or damage.
I2RH0B140066-01
Timing Chain Tensioner
Check shoe (1) for wear or damage.
1
2
3
1
4
I6RS0C140017-01
S7RS0B1406019
I2RH0B140068-01
I2RH0B140069-01