2D-9 Wheels and Tires:
2) Check tire if it can be repaired, referring to "Tire
Repair". If it cannot be repaired, replace it with new
one.
3) Replace valve core of flat tire with new one if tire is
reused after repairing.
Wheels and Tires Specifications
Tire size (Standard)
: 195/50R16 87V
Wheel size (Standard)
: 16x 6 J
Tightening torque
Wheel nut: 85 N·m (8.5 kgf-m, 61.5 lb-ft)
NOTE
• Tire inflation pressure should be checked when tires are cool.
• Specified tire inflation pressure should be found on tire placard or in owner's manual which came
with the vehicle.
Tightening Torque Specifications
Fastening part
Wheel nut
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
CAUTION
!
Be sure to use new valve core. Otherwise, air
leak may occur due to sealant attached to
valve core.
4) Install tire to rim of wheel, check that there is no air
leakage and adjust it to specified pressure shown on
tire placard.
Specifications
Tightening torque
N⋅m
kgf-m
85
8.5
S7RS0B2407001
S7RS0B2407002
Note
lb-ft
61.5
/