Throttle Body Cleaning; Intake Manifold Removal And Installation - Suzuki Swift Sport 2004 Service & Repair Manual

Throttle Body Cleaning

Clean electric throttle body assembly referring to
"Throttle Valve Visual Check" under "Electric Throttle
Body Assembly On-Vehicle Inspection in Section 1C".

Intake Manifold Removal and Installation

Removal
1) Remove cowl top plate referring to "Cowl Top
Components in Section 9K".
2) Remove throttle body referring to "Electric Throttle
Body Assembly Removal and Installation".
3) Disconnect MAP sensor coupler (1).
4) Disconnect the following hoses:
• Brake booster hose (2) from cylinder head cover
• Breather hose (3) from cylinder head cover
• PCV hose (4) from intake manifold
• EVAP canister purge valve hose (5) from intake
manifold
5) Remove hose clamp (6) from intake manifold.
6) Remove EGR pipe bolt (7) from EGR valve.
6
2
1
4
7) Remove stiffener (1) and ground terminal (2) from
S7RS0B1406008
S7RS0B1406009
8) Remove intake manifold (1) with EGR pipe (2) from
9) Remove EGR pipe from intake manifold, if
3
5
7
I6RS0B141008-01
Engine Mechanical:
intake manifold.
1
cylinder head, and then remove their gaskets (3).
3
2
necessary.
1D-14
2
I6RS0B141010-01
1
I6RS0B141009-01