Suzuki Swift Sport 2004 Service & Repair Manual page 808

5A-164 Automatic Transmission/Transaxle:
74) Connect solenoid connectors to solenoid valves
identifying their installing positions by wire colors,
and install transmission fluid temperature sensor to
its clamp.
Solenoid valve coupler specification
Solenoid valve coupler
Shift solenoid valve-A (No.1) (2)
Shift solenoid valve-B (No.2) (3)
Timing solenoid valve (1)
TCC pressure control solenoid
valve (4)
Pressure control solenoid valve (5)
Transmission fluid temperature
sensor (6)
4
6
75) Install oil strainer assembly (1).
Tightening torque
Oil strainer bolt (a): 10 N·m (1.0 kgf-m, 7.5 lb-ft)
Wire color
White
Black
Yellow
Light green /
Brown
Gray / Green
Orange
5
3
2
1
I4RS0A510030-01
I2RH0B510325-01
76) Install oil cleaner magnets (1) in oil pan (2).
NOTE
If metal particles are attached to the magnets,
clean them before installing.
77) Install new oil pan gasket (1) between transaxle case
and oil pan (2).
78) Tighten oil pan bolts to specified torque diagonally
and little by little.
Tightening torque
Oil pan bolt (a): 7.0 N·m (0.7 kgf-m, 5.0 lb-ft)
79) After applying A/T fluid to new O-rings, fit it to fluid
inlet union (1). Then install fluid outlet union to
transaxle case.
Tightening torque
Fluid outlet union (a): 25 N·m (2.5 kgf-m, 18.0 lb-
ft)
80) Install new gaskets (2) and then install fluid cooler
pipes.
Tightening torque
Fluid cooler pipe union bolt (b): 22 N·m (2.2 kgf-
m, 16.0 lb-ft)
Fluid cooler pipe bracket bolt (c): 10 N·m (1.0
kgf-m, 7.5 lb-ft)
I2RH0B510326-01
I2RH0B510327-01