Suzuki Swift Sport 2004 Service & Repair Manual page 451

7) Tighten front suspension frame mounting bolts (a) to
specified torque.
Tightening torque
Front suspension frame mounting bolt (a): 150
N·m (15.0 kgf-m, 108.5 lb-ft)
8) Lower mission jack.
9) Tighten engine rear mounting bolts (a) to specified
torque.
Tightening torque
Engine rear mounting bolt (a): 55 N·m (5.5 kgf-
m, 40.0 lb-ft)
3
2. Engine rear mounting
10) Connect muffler No.1 mounting (1) to front
suspension frame (2).
2
(a)
(a)
I4RS0A220048-01
2
(a)
I4RS0A220049-01
3. Suspension frame
1
I4RS0A220040-01
11) Remove supporting device from engine.
12) Install stabilizer joints (1), and tighten nuts to
specified torque.
When tightening, hold stud with special tools.
Special tool
(A): 09900–00411 socket
(B): 09900–00413 5 mm
Tightening torque
Stabilizer joint nut (a): 50 N·m (5.0 kgf-m, 36.5
lb-ft)
(B)
(A)
(A)
(B)
(a)
Front Suspension: 2B-18
(a)
1
1
I4RS0A220051-01