Suzuki Swift Sport 2004 Service & Repair Manual page 759

35) Remove 2nd brake gasket (1).
36) Measure O/D and 2nd coast brake piston stroke.
If piston stroke exceeds specification, inspect and
replace plates and discs.
• Measure dimension "a" from mating surface of
transaxle case to O/D and 2nd coast brake rear
plate (1) using straightedge and micrometer
caliper.
• Measure dimension "b" from O/D and 2nd coast
brake piston (2) to rear cover assembly mating
surface using straightedge and micrometer
caliper.
• Calculate piston stroke from measured value of
dimensions "a" and "b".
• Piston stroke = "a" – "b"
O/D and 2nd coast brake piston stroke
Standard: 0.65 – 1.05 mm (0.026 – 0.041 in.)
37) Remove forward and reverse clutch assembly (1).
I2RH0B510109-01
38) Remove intermediate shaft thrust bearing front race
(1), thrust bearing (2) and rear race (3) from forward
and reverse clutch assembly (4).
NOTE
If intermediate shaft thrust bearing and/or
races are not found on forward and reverse
clutch assembly, they may have been left in
transaxle.
39) Remove O/D and 2nd coast brake rear plate (1),
discs (2), separator plate (3) and retaining plate (4).
I2RH0B510110-01
Automatic Transmission/Transaxle: 5A-115
I2RH0B510111-01
I2RH0B510112-01
I2RH0B510113-01