Side Ventilation Louver Removal And Installation - Suzuki Swift Sport 2004 Service & Repair Manual

Side Ventilation Louver Removal and
Installation
Driver side ventilation louver
Removal
1) Disconnect negative (–) cable from battery.
2) Disable air bag system referring to "Disabling Air
Bag System in Section 8B".
3) Remove steering column hole cover from instrument
panel.
4) Remove combination meter cluster panel from
instrument panel, and then disconnect connectors
from front fog lamp switch, illumination cancel switch
and headlight leveling switch (if equipped) of
combination meter cluster panel.
5) Separate driver side ventilation louver (1) and
combination meter cluster (2).
1
2
Installation
Reverse removal procedure noting the following
instruction.
• Driver side ventilation louver is fitted to combination
meter cluster panel with four clips (1). When installing
driver side ventilation louver to combination meter
cluster panel, position the smallest clip to the top.
Passenger side ventilation louver
Removal
S7RS0B7106015
1) Disconnect negative (–) cable from battery.
2) Disable air bag system referring to "Disabling Air
Bag System in Section 8B".
3) Remove glove box from instrument panel.
4) Remove passenger air bag module from instrument
panel referring to "Passenger Air Bag (Inflator)
Module Removal and Installation in Section 8B".
5) Separate passenger side ventilation louver (1) and
passenger air bag module (2).
Installation
Reverse removal procedure noting the following
I4RS0B710018-01
instruction.
• Passenger side ventilation louver is fitted to
passenger air bag module with four clips (1). When
installing passenger side ventilation louver to
passenger air bag module, position the smallest clip
to the top.
1
I4RS0B710019-01
Heater and Ventilation:
1
2
1
7A-11
I4RS0B710020-01
I4RS0B710021-01