Fuel Tank Inlet Valve Removal And Installation - Suzuki Swift Sport 2004 Service & Repair Manual

1G-11 Fuel System:

Fuel Tank Inlet Valve Removal and Installation

WARNING
!
Before starting the following procedure, be
sure to observe "Precautions on Fuel System
Service" in order to reduce the risk or fire
and personal injury.
Removal
1) Remove fuel filler cap.
2) Insert hose of a hand operated pump into fuel filler
hose (1) and drain fuel in space "A" as shown in
figure.
CAUTION
!
Do not force pump hose into fuel tank, or
pump hose may damage to fuel tank inlet
valve (2).
3) Hoist vehicle, and remove clamp (2) and fuel filler
hose (1) from fuel tank.
2
S7RS0B1706011
IYSQ01170010-01
1
I4RS0A170007-01
4) Remove fuel tank inlet valve (1) using flat head rod
(2) or the like.
CAUTION
!
Be careful not to damage fuel tank inlet valve
(1) with flat head rod (2) or the like.
Installation
1) Install fuel tank inlet valve (1) to fuel tank.
2) Install fuel filler hose (1) to fuel tank and secure it
with clamp (2).
For proper installation, refer to "Fuel Hose
Disconnecting and Reconnecting".
2
3) Lower vehicle and install fuel filler cap.
I6RS0C170007-01
I2RH0B170018-01
1
I4RS0A170007-01