Differential Side Oil Seal Replacement - Suzuki Swift Sport 2004 Service & Repair Manual

5B-4 Manual Transmission/Transaxle:
7) Apply sealant to thread of level / filler plug, and then
tighten it to specified torque.
"A": Sealant 99000–31260 (SUZUKI Bond
No.1217G)
Tightening torque
Transaxle oil level / filler plug (b): 21 N·m (2.1
kgf-m, 15.5 lb-ft)

Differential Side Oil Seal Replacement

1) Lift up vehicle and drain transaxle oil.
2) Remove front drive shaft and/or center shaft
referring to "Front Drive Shaft Assembly Removal
and Installation in Section 3A".
3) Remove oil seal (1) using special tool.
Special tool
(A): 09913–50121
4) Install oil seal (1) facing its spring side inward. Use
special tool and hammer for installation.
Special tool
(A): 09913–85210
5) Apply grease to oil seal lip and at the same time
check drive shaft where oil seal contacts and make
sure of its smoothness.
"A": Grease 99000–25011 (SUZUKI Super
Grease A)
I4RS0A520001-01
6) Insert front drive shaft and/or center shaft referring to
"Front Drive Shaft Assembly Removal and
Installation in Section 3A".
7) Fill transaxle oil as specified referring to "Manual
Transaxle Oil Change", and make sure that oil has
been sealed with oil seal.
(A)
S7RS0B5206002
1
I4RH01520003-01
IYSY01520005-01